Replacement of rear bumper trim
|
|
Replacement of rear bumper trim
|
|
1.
|
Remove the plastic moulding
securing the front edge of the bumper to
the wheel housing (secured by two screws).
|
|
2.
|
Turn up the bumper trim onto the top of the outer cover.
|
|
3.
|
Put your hand inside the front edge of the bumper next to the wheel
housing on one side and detach the bumper trim and tension spring from
the spring holder on the inside of the bumper.
|
|
4.
|
Withdraw the bumper trim and spring. Remove the spring from the bumper
trim.
|
|
5.
|
Detach the bumper trim in the same manner on the other side.
|
|
6.
|
Withdraw the bumper trim from the bumper.
|
Fit in reverse order.
