Rear quarter light
Rear quarter light |
To remove |
1. |
Remove the weatherstrip from the C pillar.
|
2. |
Remove the trim round the rear quarter light.
|
3. |
Undo the nuts securing the glass.
|
4. |
Fit suckers to the outside of the side window.
|
5. |
With a helper, press the side window and pull it out. Use a knife to cut through the butyl sealing tape as the window glass comes loose. Take care to avoid damaging the paintwork and the side window's plastic embedment. Wear protective goggles and gloves.
|
To fit |
1. |
Remove the butyl tape from the body. If the old window is to be refitted, remove the butyl tape from the window as well.
|
2. |
Fit a length of butyl tape round the side window as shown. Use butyl tape having part No. (45) 30 16 755.
|
3. |
Fit the window in place and tighten the nuts.
Tightening torque: 3 Nm (2.2 lbf ft) |
4. |
Refit the trim round the quarter light.
|
5. |
Refit the weatherstrip on the C-pillar.
|