Upholstery, seat cushion, rear seat
|
Upholstery, seat cushion, rear seat
|
1.
|
Remove the seats,
.
|
2.
|
Place the seats upside down on a protected workbench.
|
3.
|
Undo the bottom of the upholstery, towards the hinge, by hand. Pull it straight up and continue round the entire lower section. The upholstery is held in place by a retaining strip sewn into it.
|
4.
|
Reverse the seat and lift the upholstery with padding off the lower section.
|
5.
|
Remove the upholstery from the padding by cutting through the staples.
|
Fit in reverse order.
Note
|
Fasten the upholstery to the padding by means of staples using the tool including in assembly kit
.
|