Toe-in

Toe-in

Note the following when checking and/or adjusting toe-in with special tool No. 88 19 013:

•

Check and adjust tyre inflation pressures.

•

Toe-in 1.5 ± 0.5 mm (0.06 ± 0.02 in).

•

Always carry out adjustment on both tie rods. The maximum permissible difference in tie-rod length is 5 mm.

•

After adjustment, check the straight-ahead position of the steering wheel when driving the car on test.

Tightening torque:

Track rod clamp bolts 22 Nm (16 lbf ft)

Important
Apply anti-rust agent to the adjusting screw threads at the slightest sign of corrosion.