Engine coolant temperature sensor
| Engine coolant temperature sensor |
| To remove |
| 1. |
Unscrew the expansion tank
filler cap to release the pressure in the cooling system. Screw the cap back on again.
|
|
| 2. |
Take off the engine cover.
|
|
| 3. |
Unplug the connector and remove the sensor.
|
|
| To fit |
Fit in reverse order.
Tightening torque 13 Nm (9.5 lbf ft)
|
|||||||
Warning
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
