"READ ON/OFF" command menu
| "READ ON/OFF" command menu | 
| ISAT scan tool display | Function | 
| DIAGNOSTIC STATUS | This command has the following submenus: • EVAP • THREE WAY CATALYTIC CONVERTER • FRONT HEATED OXYGEN SENSOR (oxygen sensor 1) • REAR HEATED OXYGEN SENSOR (oxygen sensor 2) • PREHEAT OXY SENSOR FRONT. • TRIP OBD II Each command produces an answer indicating whether the corresponding OBD II diagnosis has been monitored. Answer: "READY"/"NOT READY" | 
| CLOSED LOOP YES/NO | Internal Trionic status indicating whether closed loop
is active (=YES). | 
| CHECK ENGINE request YES/NO | Input signal from transmission control module
indicating whether the transmission has stored any emission-related OBD II diagnostic trouble
code (=YES). | 
| PREHEAT OXY SENSOR FRONT ON/OFF | Internal Trionic status indicating whether the oxygen
sensor's heating circuit is activated (=ON). | 
| PREHEAT OXY SENSOR REAR ON/OFF | Internal Trionic status indicating whether the oxygen
sensor's heating circuit is activated (=ON). | 
| ENGINE TORQUE LIMITATION ON/OFF | Input from transmission control module, see "Test
readings, control module connections". | 
| DRIVE
ON/ OFF | Input signal from transmission control module
indicating gear position. Range of measurement: P, N = "OFF" = 0 V D, 3, 2, 1 = "ON" = 12
V | 
| BRAKE LIGHT SWITCH ON/OFF | Input from brake light switch. "ON" = 12 V, "OFF" =
0 V | 
| CRUISE CONTROL ON/OFF | Input signal from Cruise Control system's
control module. "ON" = 0 V, "OFF" = 12 V | 
| A/C IN ON/OFF | Input signal from ICE via antifrost thermostat. "ON"
= 12 V, "OFF" = 0 V | 
| A/C OUT ON/OFF | Output to A/C relay/compressor. "ON" = 0 V, "OFF"
= 12 V | 
| CHECK ENGINE LAMP ON/OFF | Output to main instrument display panel. "ON" = 0
V, "OFF" = 12 V | 
| SHIFT UP LAMP ON/OFF | Output to main instrument display panel. "ON" = 0
V, "OFF" = 12 V | 
| PUMP RELAY ON/OFF | Output to fuel pump relay. "ON" = 0 V, "OFF" = 12
V | 
| MAIN RELAY ON/OFF | Output to main relay. "ON" = 0 V, "OFF" = 12
V | 
| KNOCK CONTR ACTIVE YES/NO | Internal Trionic status indicating whether ignition
retarded on account of knock control (=YES). | 
| IDLING SPEED YES/NO | Internal Trionic status indicating whether idle position present
(=YES). | 

 
		