Adjustment of throttle plate
|
|
Adjustment of throttle plate
|
|
1.
|
Take off the engine
cover.
|
|
2.
|
Disconnect the turbo delivery pipe from the throttle body.
|
|
3.
|
Check the setting of the throttle plate.
|
|
4.
|
Adjust if necessary by undoing the 2 screws and then moving the mount in the
desired direction.
|
|
5.
|
Fit the delivery pipe and cover.
Warning
|
|
After replacing the throttle position sensor, adjusting the throttle position or replacing the
ECM on cars equipped with the Saab clutch control module, the throttle position must be
adapted before the car can be driven.
Ignition switched on. Connect an ISAT scan tool and contact Trionic. Select the "IDLING
ADAPTATION" command on the "ACTIVATE" menu (do not touch the accelerator pedal).
Select the "IDLING" command on the "READ ON/OFF" menu. The ISAT must show
"YES" when the accelerator pedal is not pressed.
|
|
|
|
|
|
|
