B1605
| B1605 |
Control module fault
| Note | ||
|
This diagnostic trouble code may be generated if the control module has not been programmed correctly. |
| 1. |
Reprogram the control module. Follow the instructions in
.
|
|
| 2. |
Clear the diagnostic trouble code, finish fault diagnosis and check the system. Establish communication with the ICE module again by means of the scan tool and check whether the trouble code is generated afresh.
|
|
| 3. |
Continue fault diagnosis as described on
.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
