SAAB WIS ONLINE

Rear fog light

Rear fog light




Important

The lights switch must be in position 2 for the rear fog light to be operative.

No monitoring of ICE



1. Check that fuse 30 in the main fuse box in the dashboard and the rear fog light bulb are intact.

2. Check that 12 V is present on one of the lamp connector pins and that the resistance on the other is < 1 ohm by taking readings between the pins and a good grounding point.


If not, check the wiring for breaks/shorting between the lamp and pin 8 of the connector for the rear fog light switch.

3. Unplug the rear fog light switch and check whether about 12 V is present on connector pin 5.


If not, check the lead between the fuse and connector pin 5 for breaks/shorting.

4. Check the rear fog light switch by connecting a jumper lead between pins 5 and 8 of the switch connector.


If the rear fog light works, the fault is in the switch. Change the switch.