Remote control: flash/sound acknowledgement
|
|
Remote control: flash/sound acknowledgement
|
When the tailgate is armed/disarmed/unlocked with the remote control or car key (US/CA), a flash/sound acknowledgement can be obtained. Such acknowledgement is programmable and the pattern can be chosen within certain limits.
As delivered, the following is the case:
|
•
|
if the
left button
is pressed in to arm the car, the car's direction indicators will flash once for 0.5 sec. If the left button is used to unlock/disarming, this will be indicated by the car's direction indicators flashing 3 times. If the alarm has been active, this will be indicated with 5 flashes when it is disarmed.
|
|
•
|
if the
right button
is pressed to unlock the tailgate, this will not be indicated. It is possible, however, to program a flash/sound acknowledgement for this function.
|
LH button
Connect the ISAT scan tool.
Select "PROGRAMMING"
Select "FLASH/SOUND" and then:
|
1.
|
"ORIGINAL VALUE" to select programming as at delivery from factory (see above). It is also possible to select sound confirmation for the 3 functions.
|
|
2.
|
"ADJUSTMENT" for selection of a different type of programming to the factory default. See “Remote control unit: adjustment of flash/sound acknowledgement”.
|
