Remote control: flash/sound acknowledgement, VSS
|
|
Remote control: flash/sound acknowledgement, VSS
|
When arming/disarming/unlocking the tailgate with the remote control it is possible to obtain a flash/sound acknowledgement. These are programmable and selectable to a certain extent. The following settings apply on delivery:
|
•
|
if the
left button
is pressed to arm the car, the car's direction indicators will flash once for 0.5 seconds. If the left button is used for unlocking/disarming, this is indicated by the car's direction indicators flashing 3 times. If the car alarm has been active, this is shown by 5 flashes when disarming.
|
|
•
|
if the
right button
is pressed to unlock the tailgate, this will not be indicated. It is possible, however, to program a flash/sound acknowledgement for this function.
|
LH button
Connect ISAT scan tool. Select "PROGRAMMING". Select "FLASH/SOUND" and then:
|
1.
|
"ORIGINAL VALUE" to select programming as at delivery from factory (see above). It is also possible to select sound confirmation for the 3 functions.
|
|
2.
|
"ADJUSTMENT" to select a different type of programming to that selected at the factory. See next page.
|
