SAAB WIS ONLINE

Self-immobilization (3-circuit breaking)

Self-immobilization (3-circuit breaking)

The theft alarm can be programmed for self-immobilizing alone, and in this case, only the alarm 3 circuit breaking is activated. This happens automatically without the use of the remote control.

This function is only used when self-arming has been disabled. When self-arming is selected, the function is automatically included. Only two choices are possible and if the "ON" function is selected it will be connected in accordance with the latest self-arming alternative selected. If no self-arming alternative is selected, the function will be connected when the ignition is off and the door closed.

When the function is active, this is indicated by the LED flashing at the rate of 1 flash/second. This occurs after "TIME BEFORE ACTIV.".

PROGRAMMING

Self-immobilizing

Connect the ISAT scan tool.

Select "PROGRAMMING"

Select "SELF-IMMOBILIZING" and then:


1. "ON" to select self-immobilizing.

2. "OFF" to deselect self-immobilizing.


Time before self-immobilizing




1. Select "TIME BEFORE ACTIV." if "ON" was selected above.

2. Select time: 30, 60, 120, 180, 300 or 600 seconds as the time before the self-immobilizing is armed.


Immobilizing time

Select "ACTIVATION TIME": 30, 45 or 60 minutes.