SAAB WIS ONLINE

Setting off the alarm

Setting off the alarm


When the alarm is armed, it is set off if alarm data is received by the control module on the following connections:


• The door switch is grounded (pin 4).

• The hood switch is grounded (pin 16)

• The luggage compartment switch is grounded (pin 3).

• Signal from the glass breakage sensor (pin 7)


• Signal from the sensor disconnecting button (pin 7)

• Connection or disconnection of ignition switch, "ON" position (+15) on ignition switch (pin 10).


When the alarm is set off, the horn sounds for 30 seconds and the direction indicators flash for 5 minutes.

Anti-Theft Alarm

Starter and fuel pump relay and engine management system +15 blocked for 30 minutes. Each attempt at starting increases the blocking period with 30 minutes. If the ignition is on, these will continue to be blocked as long as the alarm is armed.

Anti-theft alarm with VSS

The engine management system prevents the engine from being started.



Important

This type of alarm tripping is standard (at delivery). Flash and sound times can be reprogrammed as required by the local market.