Solenoid, replacement
| Solenoid, replacement |
| To remove |
Important
| Important | ||
|
Solenoid ST, which controls system pressure, must not be removed. |
||
| 1. |
Remove the valve housing cover, see
.
|
|
| 2. |
Unplug the relevant solenoid's electrical connector.
|
|
| 3. |
Remove the solenoid's retaining bolt.
|
|
| 4. |
Prise the solenoid loose using a screwdriver.
|
|
| Fitting |
| 1. |
Fit the solenoid and tighten the bolt.
Tightening torque: 7 Nm (5 lbf ft). |
|
| 2. |
Plug in the solenoid's connector.
|
|
| 3. |
Fit the valve housing cover, see
.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
