Clutch housing temperature sensor
|
|
Clutch housing temperature sensor
|
|
1.
|
Remove the pressure pipe between the charge air cooler and throttle body and seal the hose to prevent dirt from entering it.
|
|
2.
|
Lift up the power steering fluid reservoir and turn it to one side.
|
|
3.
|
Unplug the three sensor connectors.
|
|
4.
|
Press the connectors out of the holder.
|
|
5.
|
Undo the three screws and lift out the holder.
|
|
6.
|
Look for the sensors' wiring harness and pull it towards the radiator.
|
|
7.
|
Snip the cable ties holding the wiring harness together.
|
|
8.
|
Unscrew the temperature sensor and remove it.
|
|
1.
|
Screw the new temperature sensor in place.
|
|
2.
|
Secure the sensor's lead to the wiring harness using new cable ties.
|
|
3.
|
Fit the wiring harness in place, press the connectors into the holder and tighten the holder's three retaining screws.
|
|
4.
|
Plug in the three sensor connectors.
|
|
5.
|
Fit the power steering fluid reservoir back in place.
|
|
6.
|
Refit the pressure pipe.
|
