SAAB WIS ONLINE

Control module

Control module

Dismantling



1. Turn the ignition switch to the OFF position.

2. Remove the glove box.

3. Remove the floor duct on the passenger's side.

4. Remove the demisting duct on the passenger's side.

5. Remove the control module from the clips on the left-hand side.


6. Unplug the connector and lift out the control module.


To refit



1. Plug in the connector and fit the control module in place.

2. Press the control module into the clips.

3. Fit the demisting duct on the passenger's side.


4. Fit the floor duct on the passenger's side.

5. Fit the glove box.

6. Program the control module with the Scan tool diagnostics instrument, "MEMORIZING GEAR POSITION"

7. Drive the car on test and adapt the slip point, see .