Master cylinder, CA unit
| Master cylinder, CA unit |
| Dismantling |
| 1. |
Remove the clutch actuator unit with master cylinder, see
.
|
|
| 2. |
Remove the two screws securing the master cylinder.
|
|
| To refit |
| 1. |
Position the master cylinder on the CA unit and tighten the two retaining screws.
|
|
| 2. |
Mount the clutch actuator unit, see
.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
