Master cylinder
| Master cylinder |
| Removal |
| 1. |
Drain the brake fluid reservoir of
brake fluid. Use the brake bleeder unit (part no. 88 19 096).
|
|
| 2. |
Place a piece of paper or rag underneath the master cylinder.
|
|
| 3. |
Disconnect and plug the brake pipe connections.
|
|
| 4. |
Remove the two master cylinder retaining nuts and lift out the master cylinder.
|
|
| 5. |
Transfer the brake fluid reservoir to the new master
cylinder.
|
|
| Fitting |
| 1. |
Fit the master cylinder to the
brake servo unit and tighten the retaining nuts.
|
|
| 2. |
Fit the brake pipe connections. Take away the paper or rag from under the
master cylinder.
|
|
| 3. |
Top up the brake fluid in the brake fluid reservoir.
|
|
| 4. |
Bleed the brake system.
|
|
| 5. |
Check operation by depressing the brake pedal. Also check the brake pipe
connections for tightness and leaks.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
