Control module voltage feed
| Control module voltage feed |
The control module is specified to work with a power supply between 7-16 volts.
| Connector |
The control module connector is supplied with 5 short-circuiting jumpers that in pairs short-circuit the cables to the four electric detonators and between the warning lamp conductor and ground.
| Diagnosis with diagnostic tool |
The communication with the diagnostic tool goes via pin 9. The data link connector is located under the dashboard under the steering wheel.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
