Control panel
| Control panel |
| To remove |
| 1. |
Remove the panel on the right-hand side of the centre console.
|
|
| 2. |
Press out the control panel from the rear and remove it from the control shaft.
|
|
| 3. |
Unplug the connectors.
|
|
| 4. |
Remove the clip securing the wire to the control panel.
|
|
| 5. |
Unhook the wire eye.
|
|
| To fit |
| 1. |
Refit the control wire to the rear of the control panel.
|
|
| 2. |
Press on the clip securing the wire.
|
|
| 3. |
Plug in the connectors.
|
|
| 4. |
Refit the control panel.
|
|
| 5. |
Refit the panel on the centre console.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
