Fan resistor
| Fan resistor |
| To remove |
| 1. |
Remove the wiper arms.
|
|
| 2. |
Remove the cover over the bulkhead.
|
|
| 3. |
Remove the wiper unit.
|
|
| 4. |
Remove the fresh-air filter.
|
|
| 5. |
Unplug the ventilation fan connector.
|
|
| 6. |
Remove the fresh-air filter frame.
|
|
| 7. |
Remove the ventilation fan cover.
|
|
| 8. |
Remove the screw securing the fan resistor.
|
|
| 9. |
Unplug the fan resistor connector.
|
|
| To fit |
| 1. |
Plug in the fan resistor connector.
|
|
| 2. |
Position the fan resistor and tighten the screw.
|
|
| 3. |
Refit the cover over the ventilation fan.
|
|
| 4. |
Refit the fresh-air filter frame.
|
|
| 5. |
Plug in the ventilation fan connector.
|
|
| 6. |
Refit the fresh-air filter.
|
|
| 7. |
Refit the wiper unit.
|
|
| 8. |
Refit the cover over the space between the bulkhead partitions.
|
|
| 9. |
Refit the wiper arms.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
