Stepping motor for air distributor
| Stepping motor for air distributor |
For a description of the stepping motor, see
. The air distributor directs the flow of air to the various air ducts.
|
Distribution
|
Manual selection angle
|
Auto angle
|
|
Defrost
|
270
°
|
250
°
-270
°
(only cold starts)
|
|
Defrost-floor
|
207
°
|
207
°
-250
°
|
|
Floor
|
180
°
|
Not used
|
|
Panel-Floor
|
150
°
|
Not used
|
|
Panel
|
90
°
|
93
°
-96
°
|
Floor and Panel-Floor distribution settings are not used in the Auto mode of operation. If the requisite blended-air temperature is high, air distribution will be set to the defrost-floor position. If the requisite blended-air temperature is low, air distribution will be set closer to the defrost position. In the case of requisite blended-air temperatures that are extremely low, air distribution will be set to the panel position. As will be realised, air distribution is a function of the requisite blended-air temperature. The desired air distribution can also be selected manually on the ACC panel. Air distribution is shown by means of symbols on the ACC unit's display.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
