Changing wiring harness in the passenger compartment
|
|
Changing wiring harness in the passenger compartment
|
|
1.
|
Changing the rear harness is a major task and the following points are only intended to simplify removal.
|
|
2.
|
Remove the trim around the windscreen, sill protection on both sides and both front seats.
|
|
3.
|
Remove the rear seat backrest, seat cushion and the side trim on both sides of the rear seat.
|
|
4.
|
Remove the front and rear centre console and the dashboard.
|
|
5.
|
Lift the car and remove the fuel tank so that the fuel pump connectors are accessible and pull them into the compartment.
|
|
6.
|
Unplug the rear wheel sensor connectors.
|
|
7.
|
Remove the sill protection and the left and right-hand side trim in the luggage compartment.
|
|
8.
|
Mark all the connectors accurately
before disconnecting them from their components.
|
|
9.
|
Fit the new wiring harness, carefully checking the colour code on the connectors against the car's wiring diagram.
|
Note
|
|
Secure the wiring harness correctly so that there is no risk of it rattling.
|
|
