Emergency closing lever
| Emergency closing lever |
| To remove |
| 1. |
Remove the emergency closing lever microswitch. See
|
|
| 2. |
Remove the screws securing the emergency closing lever.
|
|
| 3. |
Mark out the position of the control cable, detach the cable from the lever and remove the lever.
|
|
| To fit |
| 1. |
Put the emergency closing lever in place and tighten the screws as marked.
|
|
| 2. |
Attach the cable to the lever.
|
|
| 3. |
Put back the microswitch. See
.
|
|
| 4. |
Adjust the cable as necessary. See
.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
