SAAB WIS ONLINE

Luggage compartment trim

Luggage compartment trim

To remove


1. Remove the sill protection.

2. Remove the clips securing the sides of the trim.


3. Loosen the luggage compartment seal.

4. Unplug the electric connector to the luggage compartment light.

5. Remove the clips securing the floor mat and lift it out.


6. Remove the screw securing the load retainer loop.

7. Remove the clips securing the front of the trim. Lift out the trim.


To fit



1. Put the trim in place and press on the clips at the front.

2. Fit the load retainer loop and tighten the screw.

Tightening torque 25 Nm (18.5 lbf ft)

3. Put the floor mat in place and press on the clips.

4. Plug in the connector for the luggage compartment light.


5. Press on the clips securing the sides of the trim.

6. Refit the luggage compartment seal.

7. Refit the sill protection.