Microswitch in fifth bow latch
| Microswitch in fifth bow latch |
| To remove |
| 1. |
Raise the soft top cover.
|
|
| 2. |
Remove the cover.
|
|
| 3. |
Remove the screws securing the microswitch.
|
|
| 4. |
Cut off the cable tie securing the connector.
|
|
| 5. |
Unplug the connector.
|
|
| To fit |
| 1. |
Put the microswitch in place and tighten the screws.
|
|
| 2. |
Plug in the connector.
|
|
| 3. |
Secure the connector with a cable tie.
|
|
| 4. |
Put the cover in position and tighten the screws.
|
|
| 5. |
Connect the diagnostic tool and clear any diagnostic trouble codes.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
