Bonnet locking mechanism
| Bonnet locking mechanism |
| To remove |
| 1. |
Open the bonnet.
|
|
| 2. |
Remove the bonnet lock spring from its tensioned position.
|
|
| 3. |
Unhook the bonnet-release cable from the bonnet lock spring.
|
|
| 4. |
Remove the bonnet lock spring by withdrawing it from the front cross-member.
|
|
| To fit |
Fit in reverse order.
| Note | ||
|
Grease the bonnet lock spring in accordance with the service instructions. |
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
