Backrest hatch
| Backrest hatch |
| To remove |
| 1. |
Remove the centre armrest, see
page 852-26.
|
|
| 2. |
Open the hatch.
|
|
| 3. |
Press down on the padding below the backrest hatch so that the brackets
for the hatch will be accessible, one bracket on each side of the hatch.
|
|
| 4. |
Press out the bushes in the centre of the pivots, using a screwdriver.
Press them in towards the hatch.
|
|
| 5. |
Release the pivot sleeve (a plastic bush with hooks), using a pair of
pliers
|
|
| 6. |
Lift out the backrest hatch.
|
|
| To fit |
Fit in reverse order.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
