Pressure regulator, V6 engine
| Pressure regulator, V6 engine |
| To remove |
| 1. |
Remove the vacuum hose.
|
|
| 2. |
Slacken the screw and lower the clip.
|
|
| 3. |
Withdraw the pressure regulator.
|
|
| To fit |
Fit in reverse order.
| Important | ||
|
Lubricate the O-ring before fitting it in place. Check that the pressure regulator vacuum hose is connected to the front nipple on the throttle body (in front of the butterfly). |
||
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
