SAAB WIS ONLINE

"ACTIVATE" command menu

"ACTIVATE" command menu

ISAT scan tool display

Function

INJECTORS

This command has a submenu, as follows:

• Injector, cyl. 1

• Injector CYL 2

• Injector, cyl. 3

• Injector, cyl. 4

Each injector is activated for 10 seconds at a frequency of 10 Hz.

IGNITION COILS

This command has a submenu, as follows:

• IGNITION COIL CYL 1

• IGNITION COIL CYL 2

• IGNITION COIL CYL 3

• IGNITION COIL CYL 4

The relevant ignition coil is activated for 10 seconds at a frequency of 200 Hz.

BOOST PRESS. VALVE

The boost pressure control valve (APC) is activated for 10 seconds at a frequency of 90 Hz.

IAC VALVE

The idle air control valve is activated for 10 seconds with a current of 0,6 A.

EVAP VALVE

The EVAP canister purge valve is activated for 10 seconds at a frequency of 8 Hz

PREHEAT OXY SENSOR FRONT

The oxygen sensor's heating circuit is activated for 10 seconds.

PREHEAT OXY SENSOR REAR

The oxygen sensor's heating circuit is activated for 10 seconds.

A/C RELAY

The A/C relay/compressor is activated for 10 seconds at a frequency of 1 Hz.

CHECK ENGINE LAMP

The CHECK ENGINE lamp (MIL) is activated for 10 seconds at a frequency of 1 Hz.

SHIFT UP LAMP

The SHIFT UP lamp is activated for 10 seconds at a frequency of 1 Hz.

PUMP RELAY

The fuel pump relay is activated for 10 seconds at a frequency of 1 Hz.

MAIN RELAY

The main relay is activated for 10 seconds at a frequency of 1 Hz.

IDLING ADAPTATION

This command is used in connection with forced adaptation of the throttle position at idling speed.

BOOST PRESS.RESET

This command is used in connection with resetting boost pressure adaptation.

CANISTER CLOSE VAL

The shut-off valve for the EVAP system is activated for 10 seconds.