A/C compressor
| A/C compressor |
When the A/C compressor is activated, either from the ACC electronic control module or by means of the A/C button on the dashboard, current (B+) is applied to pin 59 of the Trionic electronic control module via ICE, the antifrost thermostat and the pressure switch.
The control module then opens the idle air control valve slightly wider to prepare for the forthcoming load increase. After a short delay the control module grounds pin 54, which is connected to the A/C relay.
The ECM breaks the circuit to pin 54 if the engine has not yet been started.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
