ISAT
display
|
Function
|
INJECTORS
|
This command has a submenu as follows: •
INJECTOR CYL 1 • INJECTOR CYL 2 • INJECTOR CYL 3 • INJECTOR CYL 4
The injector concerned is activated for 10 seconds at a frequency of 10Hz
|
IGNITION COILS
|
This command has a submenu as follows: •
IGNITION COIL CYL 1 • IGNITION COIL CYL 2 • IGNITION COIL CYL 3 •
IGNITION COIL CYL 4 The ignition coil concerned is activated for 10 seconds at a frequency
of 200 Hz
|
SOLENOID VALVE
|
The BPC (APC) solenoid valve is activated for 10
seconds at a frequency of 90Hz
|
IAC VALVE
|
The idle air control (IAC) valve is activated for 10
seconds with a current of 0.6A
|
EVAP VALVE
|
The purge valve (EVAP valve) is activated for 10
seconds at a frequency of 8Hz
|
OXY SENSOR PREHEAT
|
The oxygen sensor preheater is activated for 10
seconds
|
AC RELAY
|
AC relay/compressor is activated for 10
seconds at a frequency of 1 Hz
|
Malfunction indicator lamp
|
The malfunction indicator lamp (CHECK ENGINE) is
activated for 10 seconds at a frequency of 1Hz
|
SHIFT-UP LAMP
|
The SHIFT UP lamp is activated for 10 seconds at a
frequency of 1Hz
|
FUEL PUMP RELAY
|
The fuel pump relay is activated for 10 seconds at a
frequency of 1Hz
|
MAIN RELAY
|
The main relay is activated for 10 seconds at a
frequency of 1Hz
|
IDLING ADAPTATION
|
This command is used in the forced adaptation of
the throttle position during idling
|
RESET BOOST PRESSURE
|
This command is used for resetting boost pressure
adaptation
|