ISAT
display
|
Function
|
TORQUE LIMITATION ON 0 V/ OFF 12
V
|
Input signal from automatic transmission control
module. See "Measured values, ECM connections", pin 13
|
DRIVE SIGNAL ON 12 V/ OFF 0
V
|
Input signal from automatic transmission control
module.
See "Measured values, ECM connections", pin 14
|
BRAKE LIGHT SWITCH ON 12 V/ OFF 0
V
|
Input from brake light switch.
See "Measured values, ECM connections", pin 15
|
CRUISE CONTROL ON 0 V/ OFF 12
V
|
Input signal from cruise control ECM.
See "Measured values, ECM connections", pin 36
|
AC ON 12 V/ OFF 0 V
|
Input signal from ICE ECM via anti-freeze
thermostat. See "Measured values, ECM connections", pin 59
|
OXY SENSOR PREHEAT ON/
OFF
|
Internal Trionic status indicating whether the oxygen
sensor preheating circuit is activated (=ON)
|
AC OUT ON 0 V/ OFF 12 V
|
Output to AC relay/compressor via pressure
switch. See "Measured values, ECM connections", pin 54
|
CHECK ENGINE LAMP ON 0 V/ OFF 12
V
|
Output to main instrument. See "Measured values,
ECM connections", pin 32
|
SHIFT UP LAMP ON 0 V/ OFF 12
V
|
Output to main instrument. See "Measured values,
ECM connections", pin 55
|
FUEL PUMP RELAY ON 0 V/ OFF 12
V
|
Output to fuel pump relay. See "Measured values,
ECM connections", pin 56
|
MAIN RELAY ON 0 V/ OFF 12 V
|
Output to main relay. See "Measured values, ECM
connections", pin 31
|
KNOCK REG. ACTIVE YES/NO
|
Internal Trionic status indicating whether ignition
reduction takes place on the basis of knock regulation
|
IDLING YES/NO
|
Internal Trionic status indicating whether idling
exists
|