Wastegate
| Wastegate |
| Checking |
If it is not possible to adjust the basic boost pressure, check as follows:
| 1. |
Release the curved exhaust pipe from the turbo unit and visually check that the flap valve is in good contact with the turbine housing.
|
|
| 2. |
Break the seal, remove the locking ring and unhook the pressure rod from the valve's control lever.
|
|
| 3. |
Check that the lever can be moved freely.
Change the faulty control valve. |
|
| 4. |
Refit the locking ring and re-seal the pressure rod.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
