Power aerial
| Power aerial |
| To remove |
| 1. |
Remove the two clips securing
the LH side trim at the rear light cluster and also remove the screws securing the loudspeaker
grille.
|
|
| 2. |
Bend the trim aside.
|
|
| 3. |
Undo the nut at the base of the aerial and the two screws securing the aerial
bracket.
|
|
| 4. |
Lift out the bracket complete with aerial and unplug the connector.
|
|
| 5. |
Remove the connector from the bracket and remove the two screws securing the
power aerial.
|
|
| 6. |
Remove the motor from the bracket.
|
|
| To fit |
Fit in reverse order.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
