Safety circuit, headlamps
| Safety circuit, headlamps |
A safety circuit in the system ensures that dipped headlamps will always be available, even in the event of ICE control module failure (limp-home mode).
Power for the dipped headlamps is supplied directly from pin 56 of the lights switch when the switch is in position 2.
In the event of ICE module failure the dipswitch will be inoperative but the headlamp flasher will work in limp-home mode.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
