Replacement of belt tensioner (4-cylinder)
| Replacement of belt tensioner (4- cylinder) |
| 1. |
Remove the air cleaner and air
induction hose from between the lower
part of the air cleaner and the throttle body.
|
|
| 2. |
Take the strain off the belt tensioner and prise off the alternator's
poly-V belt.
|
|
| 3. |
Remove the belt tensioner, using an 8 mm Allen key about 30 mm
long.
Fit in reverse order. |
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
