Checking the CRUISE lamp
| Checking the CRUISE lamp |
| 1. |
Check that 12 V is present
across pin 8 (H) of the Cruise Control connector and a good ground when the Cruise Control
system is activated.
|
|
| 2. |
If the voltage is OK, check the wiring for continuity or a short circuit by
measuring the resistance across pin 8 (H) of the Cruise Control connector and pin 50 of main
instrument display 2 or pin 2 of main instrument display 1.
If the resistance is < 1 ohm, check the bulb. If the resistance is > 1 ohm, check the wiring and rectify the fault. |
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
