Replacement of ignition coil unit, MOTRONIC (V6)
| Replacement of ignition coil unit, MOTRONIC (V6) |
| To remove |
| 1. |
Remove the left-hand cover
over the ignition coil unit.
|
|
| 2. |
Unplug the connector on the top.
|
|
| 3. |
Undo the four bolts securing the ignition coil unit and remove the
unit.
|
|
| 4. |
Remove the HT leads.
|
|
| To fit |
| Important | ||
|
Be sure to check the numbering of the HT leads. |
||
In other respects, refit in reverse order.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
