SAAB WIS ONLINE

Replacement of horn switch

Replacement of horn switch


To remove


1. Disconnect the negative battery cable.

2. Remove the airbag module. To do this, unscrew the bolts at the rear (underside) of the steering wheel.


Warning

When the airbag module has been removed, never place it with the steering wheel pad facing downwards .


3. Lift out the airbag module and unplug the connector.

4. Prise out the horn buttons, using a screwdriver.

5. Bend aside the switch contacts on each side of the steering wheel.

6. Remove the screw securing the horn switch and unplug the connector.


To fit

Warning

Take the utmost care when fitting the airbag module back in place.


In other respects, refit in reverse order.