Replacement of stalk switch for lights
| Replacement of stalk switch for lights |
| 1. |
Pull up the
steering wheel to its fullest extent.
|
|
| 2. |
Remove the steering column bearing bracket covers (3 screws).
|
|
| 3. |
Withdraw the stalk (pressed into grooves).
|
|
| 4. |
Unplug the 10-pin connector.
Fit in reverse order. |
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
