General fault diagnosis hints

/ 900 / 1997 / 3. Electrical system / Starting system / Fault diagnosis on basis of fault symptoms / General fault diagnosis hints

1.	Inspect Maxi fuses 2 and 3 and check whether they are supplied with current.

2.	Check that relay holder terminal 30 is supplied with current when the ignition switch is in the Start position.

3.	Check starting interlock switch 77 on cars with automatic transmission.

4.	Check that the starter motor is grounded to the car's chassis.

5.	Check connectors, wiring harnesses and ground connections.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.