Alarm signal, country-specific/own alternative/siren, VSS
Alarm signal, country-specific/own alternative/siren, VSS |
The theft alarm is pre-programmed for the requirements of 4 different countries on how an alarm is given. The operation thus fulfils the laws and insurance requirements that apply in these countries. For countries with other requirements, and for different customer requirements, individual programming is available under "OWN ALTERNATIVE" in the menu.
PROGRAMMING |
Country-specific
1. |
Connect the ISAT scan tool.
Select "PROGRAMMING" |
2. |
Select "COUNTRY CODE".
|
3. |
Select country.
The values that apply for each country are given in the table on the right. For "OWN ALTERNATIVE" or "SIREN", see the description on the next page. |
Country
|
Sound time
|
Flash time
|
Germany
|
30 sec.(*
|
5 min
|
Great Britain
|
30 sec.(*
|
does not flash
|
Switzerland
|
30 sec.(**
|
does not flash
|
OWN ALTERNATIVE
|
|
|
Holland
|
30 sec.(**
|
5 min
|
Siren
|
|
|
*) Sound reproduced at intervals.
**) Sound reproduced continuously.
Own alternative
1. |
Select "COUNTRY CODE".
Select "OWN ALTERNATIVE". |
2. |
Select desired values for alarm signal (sound and/or direction indicators) according to table below.
Sound time: 0-30-60-90-120-180-240-300 sec Acoustic frequency: 0-0.5-1-2 signals/sec. Flash time: 0-60-120-180-240-300 sec Flash frequency: 0-0.5-1-2-4 signals/sec. |
Siren
If a siren with battery back-up is fitted, this must be selected in the country code menu. The "SIREN" command, last in the programming menu, must also be selected "ON".Important | ||
The alarm horn must be disconnected when a siren with battery back-up is fitted. |
||