Horn, fitting kit
| Horn, fitting kit |
| 1. |
Raise the car and remove the front left-hand wheel. Remove the rear part of the wing liner and the plastic clip that holds upper part of the wing liner in the wheel housing.
|
|
| 2. |
Find two 1 pin connectors in the wheel housing. Plug in the connectors to the horn.
|
|
| 3. |
Bolt down the horn with nut and washer.
|
|
| 4. |
Refit the wing liner and left-hand front wheel. Lower the car to the floor. Door switches, front doors
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
