Replacement of fluid level sensor
| Replacement of fluid level sensor |
| 1. |
Raise the car and remove the
air deflector on the left, below the
spoiler.
|
|
| 2. |
Remove the bolt securing the wing liner
(at the front only) in the left-hand wheel housing.
|
|
| 3. |
Pull off the fluid level sensor to remove it from the washer fluid
reservoir.
|
|
| 4. |
Unplug the connector.
Fit in reverse order. |
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
