SAAB WIS ONLINE

Input shaft speed sensor

Input shaft speed sensor

To remove


1. Turn the expansion tank aside.


2. Remove the sensor's screw.

3. Raise the car.

4. Remove the left-hand front wheel.

5. Inch out the sensor.

6. Unplug the electrical connector.


Fitting


1. Plug in the sensor connector and fit the sensor in place.


2. Refit the front wheel.

Tightening torque 100 Nm (74 lbf ft) pressed steel wheels. 120 Nm (89 lbf ft) light alloy wheels.

Lower the car to the floor.

3. Tighten the sensor's screw.

Tightening torque: 6 Nm (4.5 lbf ft).

4. Refit the expansion tank.