Bushes in the gear lever link.
| Bushes in the gear lever link. |
| 1. |
Remove the gear rod as described in Section "Gear Lever" .
|
|
| 2. |
Knock out the spacing sleeve with a drift.
|
|
| 3. |
Take out and change the bushes.
|
|
| 4. |
Fit the spacing sleeve.
|
|
| 5. |
Fit the gear lever as described in Section "Gear Lever".
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
