ISAT Scan Tool, diagnostic operation
| ISAT Scan Tool, diagnostic operation |
Communication between the control module and the ISAT scan tool is two-way and goes via pin 11 (K lead).
Using the ISAT scan tool, readouts of any diagnostic trouble codes stored in the control module can be obtained.
The ISAT Scan Tool can also command the electronic control module to work the boost pressure control valves or read the wheel speeds.
The data link connector (DTC) (diagnostic socket) is located under the dashboard on the driver's side.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
