Amendment toService Manual 7 “Suspension and wheels”
|
SERVICE INFORMATION
|
|
Bulletin Nbr:
|
732-1693 ED. 3
|
|
Date:
...........
|
MAY 1997
|
|
Market:
|
ALL
|
|
|
Amendment to
Service Manual 7 “Suspension and wheels”
|
Some of the dimensions relating to the rear suspension have been
changed (see table).
Rear-wheel alignment
Toe-in (measured at wheel rim)
|
mm (in)
|
1.0 ± 2.0 (0.04 ±
0.08)
|
Camber
|
Degrees (°)
|
-1.7 ± 0.3
|
Enter the amended figures in the table on page 027-2 of Service
Manual 7 “Suspension and wheels” or refer to this Service Information. This
also applies to Service Manual 0:2 “Technical
data”.
