SAAB WIS ONLINE

Knee member, passenger

Knee member, passenger

To remove


1. Open the glove box. Open the covers and remove the retaining screws (A).

2. Remove the other retaining screws (B), the retaining bolt and the expanding rivet in the front edge and remove the catch from the bulkhead bracket.

3. Pull out the glove box and unplug the connector for the glove-box lighting (C).

4. Lift out the knee member.

5. Remove the panel on the side of the centre console (D).

6. Remove the screws securing the knee member and lift it out (E).


To fit


1. Refit the knee member and tighten the screws (E).

2. Refit the panel on the side of the centre console (D).

3. Plug in the connector to the glove-box lighting and refit the glove-box (C).

4. Fit the expanding rivet, retaining bolt, retaining screws and cover on the glove box (B and A).